My answer to that question would be a resounding MAYBE!
I thoroughly enjoy re-imagining pieces of junk into inspired pieces of wearable art. It also pleases me to repurpose what is already available rather than add to the depletion of our natural resources.
 |
| Bangles made from recycled plumbing pipe |
My customers enjoy the back story that recycled materials create, and they also like contributing positively to the environment through their purchases.
I've been recycling copper into jewelry for the past 10 years and it has become such an integral part of my process that using purchased new copper would feel at odds with what my jewelry represents.
BUT, if saving money on materials was my only motivation for recycling copper, I probably wouldn't bother. Copper is relatively inexpensive to buy but my 'free' recycled copper costs me hours in labour that I rarely recover in the final price of my creations.
So, is recycling copper to make jewelry worth it to you?
If you want to try out recycling copper plumbing pipe, here is a free tutorial. Be sure to take all safety precautions recommended by the manufacturer of your tools. Wear a mask and safety glasses.
 |
| Cut the pipe to length with a pipe cutter, available at your local hardware store. Anneal with a torch. Quench. |
 |
Draw a guideline lengthwise with a marker. Put the piece of pipe in a vise, horizontally. Use a metal cutting wheel in a rotary tool (like a Dremel) and use oil to help keep the cutting wheel from overheating. I run it through some 3 in 1 oil each time I cut across the pipe. Grip the rotary tool firmly with both hands and run the cutting disk along the line you have marked, repeatedly, until it cuts through the copper. This can take awhile. Be careful of kickback, particularly as the wheel breaks through the copper. One one and half inch Dremel metal cutting disk (E-Z lock kind) lasts me through about three 8" lengths of pipe if I'm careful and lucky. |
 | ||||
| Remove pipe from vice and anneal and quench. Using pliers on both sides of cut, work the annealed pipe apart. Anneal and quench again if necessarily. |
 | ||
| Your next steps depend on how your sheet will be used. |
 | |
| I use a throat shear purchased at an automotive supply shop (Princess Auto here in Canada) to cut my sheet into strips that will fit into my rolling mill. Don't try to cut too far along the strip at a time with the throat shear, otherwise it tends to curve. Annealing and quenching as needed, I roll out my cut pieces to the gauge I want and then cut those pieces to size with my throat shear. |
Please excuse my crappy phone photos. I was taking the pictures as I worked through the process and I didn't have my good camera.
